Engineered for demanding industrial environments, this Nylon Stock Sheet provides exceptional durability, self-lubricating properties, and excellent machinability for custom component fabrication.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.234" |
| Length | 20" |
| Width | 17" |
A proven choice for industrial professionals, this Nylon Stock Sheet, measuring 0.234 inches thick, 20 inches in length, and 17 inches in width, is manufactured from high-performance nylon. This material exhibits superior tensile strength, excellent abrasion resistance, and a low coefficient of friction, making it ideal for applications requiring reduced wear and efficient operation. Its inherent toughness and resistance to chemicals and moisture ensure longevity in harsh operational settings. This stock material is readily machinable into custom parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark desired dimensions on the Nylon Stock Sheet. 2. Utilize appropriate sawing or cutting tools (e.g., band saw, table saw with fine-tooth blade) for clean cuts, ensuring proper blade speed and feed rate. 3. Deburr cut edges using a fine file or deburring tool to remove any sharp edges and ensure a smooth finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades which can cause excessive melting and chipping. | Employ carbide-tipped blades with a higher tooth count and slower cutting speed specifically designed for plastics and nylon. |
| Not accounting for thermal expansion during cutting, leading to inaccurate dimensions. | Allow the material to reach ambient temperature before cutting and consider a slight over-allowance for expansion in critical dimensions. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom gears and sprockets, Wear pads and bushings, Protective liners and shims.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||