This robust Nylon stock sheet is engineered for demanding pneumatic systems. Its superior durability and chemical resistance make it ideal for custom fabrication of critical components.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.230" |
| Length | 47" |
| Width | 38" |
A high-performance industrial component, this Nylon stock sheet offers exceptional strength and resilience for critical pneumatic applications. With dimensions of 0.230 inches thick, 47 inches in length, and 38 inches in width, it provides ample material for custom fabrication of seals, wear pads, and structural elements within pneumatic cylinders, valves, and actuators. Nylon's inherent properties include excellent abrasion resistance, good impact strength, and resistance to a wide range of oils, greases, and solvents, ensuring longevity and reliable performance in harsh industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Fabricate the component from the nylon stock sheet according to design specifications. 2. Ensure all mating surfaces are clean and free of debris before assembly. 3. Securely install the fabricated nylon component into the pneumatic system, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting techniques causing delamination or excessive heat buildup. | Utilize sharp tooling and appropriate feed rates when cutting nylon to prevent heat generation and ensure clean edges. |
| Over-tightening fasteners, leading to stress concentration and potential cracking. | Employ proper torque specifications when fastening nylon components and consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic seals and gaskets, Wear pads and guides for pneumatic cylinders, Bushings and bearings in pneumatic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||