This robust Nylon stock sheet offers superior durability and wear resistance. Precision-cut to 0.223" x 26" x 48", it is engineered for demanding industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.223" |
| Length | 26" |
| Width | 48" |
Manufactured under strict quality controls, this 0.223-inch thick Nylon stock sheet measures 26 inches by 48 inches. Its high tensile strength, excellent abrasion resistance, and good chemical inertness make it ideal for fabricating custom jigs, fixtures, wear pads, and protective components. The material exhibits low friction and good machinability, ensuring precise fabrication for critical applications where dimensional stability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface for installation is clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Secure the fabricated component using suitable fasteners or adhesives, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to chipping or melting. | Utilize sharp, specialized plastic cutting tools such as a carbide-tipped saw or a CNC router with appropriate feed rates and speeds. |
| Over-tightening fasteners, causing stress fractures. | Employ washers and avoid excessive torque when fastening; consider pre-drilling oversized holes if significant thermal expansion is anticipated. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Jigs and Fixtures, Wear Pads and Bushings, Protective Guards and Components, Gears and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||