This industrial-grade Nylon stock sheet offers exceptional strength, wear resistance, and low friction. Precision-cut for consistent dimensions, it's ready for your demanding fabrication needs.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.208" |
| Length | 20" |
| Width | 27" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.208 inches thick, 20 inches in length, and 27 inches in width. Composed of high-quality nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction, making it ideal for components subjected to high stress and abrasive conditions. Its inherent self-lubricating properties reduce wear and extend service life in dynamic applications. The dimensional stability ensures predictable performance in machining and assembly processes, suitable for gears, bearings, wear pads, and custom machine parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired cut lines on the Nylon stock sheet. 2. Securely clamp the sheet to a stable cutting surface. 3. Utilize appropriate sawing equipment (e.g., band saw, circular saw) with a fine-tooth blade designed for plastics. Ensure proper blade speed and feed rate to prevent melting or chipping. 4. Deburr edges after cutting for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a blade with too few teeth or incorrect tooth pitch | Employ a blade with a high tooth count (e.g., 8-10 TPI) and a negative or neutral rake angle for clean cuts without excessive heat buildup. |
| Cutting at too high a speed or with excessive force | Maintain a moderate cutting speed and consistent, light pressure to avoid melting, binding, or chipping the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Gears and Sprockets, Custom Machine Components, Impact Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||