This premium Nylon Stock Sheet is engineered for demanding electrical and industrial applications. Its robust dielectric properties and mechanical strength make it a superior choice for insulation and structural components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.199" |
| Length | 34" |
| Width | 31" |
Manufactured under strict quality controls, this Nylon Stock Sheet boasts a thickness of 0.199 inches, with generous dimensions of 34 inches in length and 31 inches in width. Composed of high-performance nylon, it exhibits excellent tensile strength, abrasion resistance, and superior electrical insulation properties. Its low coefficient of friction and resistance to common chemicals further enhance its utility in harsh environments. Ideal for fabricating custom electrical insulators, mechanical parts, and protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired cut lines on the Nylon Stock Sheet. 2. Utilize appropriate cutting tools (e.g., band saw, router) with sufficient blade sharpness for clean cuts. 3. Smooth any rough edges with sandpaper or a deburring tool to ensure a safe and precise finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to chipping or uneven edges. | Ensure all cutting blades are sharp and appropriately designed for working with plastic materials. |
| Overheating the material during cutting, which can cause melting or deformation. | Employ moderate cutting speeds and consider using coolant if necessary to manage heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation components, Custom jigs and fixtures, Mechanical wear parts, Protective shielding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||