This robust Nylon stock sheet offers superior wear resistance and a low coefficient of friction, making it ideal for heavy-duty material handling applications. Its precisely engineered dimensions ensure optimal fit and function in critical operational environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.199" |
| Length | 18" |
| Width | 42" |
Engineered for reliability and performance, this Nylon stock sheet boasts a thickness of 0.199 inches, a length of 18 inches, and a width of 42 inches. Composed of high-grade Nylon, it exhibits exceptional tensile strength, excellent abrasion resistance, and a naturally low coefficient of friction. These properties are crucial for minimizing wear and tear on moving parts and reducing energy consumption in conveyor systems, chutes, and wear strips. Its chemical inertness ensures longevity in diverse industrial settings, resisting common solvents and oils.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove debris. 2. Accurately measure and mark the sheet for cutting to the required dimensions. 3. Securely fasten the cut Nylon sheet to the intended substrate using appropriate mechanical fasteners or adhesives, ensuring a flush fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that can damage the Nylon. | Utilize fasteners with a broad head or washer to distribute pressure and prevent over-tightening. |
| Ignoring material expansion/contraction due to temperature changes. | Allow for slight clearance around the edges during installation if extreme temperature fluctuations are expected. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and liners for chutes, Conveyor system components, Bushings and bearings, Impact pads.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||