This premium Nylon stock sheet offers exceptional durability and low friction for critical material handling components. Precisely cut to standard dimensions, it ensures reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.195" |
| Length | 28" |
| Width | 17" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.195 inches thick, 28 inches in length, and 17 inches in width. Constructed from high-grade Nylon, it exhibits superior abrasion resistance, impact strength, and a low coefficient of friction, making it ideal for wear strips, guide rails, and impact pads. Its excellent chemical resistance ensures longevity when exposed to common industrial lubricants and cleaning agents. This robust material is engineered to withstand significant loads and repeated stress cycles, crucial for extending the service life of material handling equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately measure and mark cut lines on the Nylon stock sheet as per design requirements. 3. Cut the sheet using appropriate industrial cutting tools suitable for plastics, ensuring clean edges. 4. Secure the cut Nylon component to the application using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracking. | Use washers and do not over-tighten fasteners. Allow for thermal expansion if necessary. |
| Using incorrect cutting tools, resulting in rough edges and potential delamination. | Employ sharp, specialized plastic cutting blades or routers to achieve smooth, precise cuts. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Impact Pads and Bumpers, Chute Liners, Bearing Surfaces, Custom Fabrication for Material Handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||