This high-grade Nylon stock sheet is engineered for superior performance in lubricating applications. Its robust material properties ensure excellent wear resistance and low friction, making it ideal for demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.194" |
| Length | 44" |
| Width | 45" |
Built to exacting engineering tolerances, this 0.194-inch thick Nylon stock sheet measures 44 inches in length and 45 inches in width. Composed of high-density Nylon, it exhibits exceptional mechanical strength, good abrasion resistance, and a naturally low coefficient of friction, reducing wear and energy consumption in moving parts. This material is dimensionally stable and resistant to many chemicals, making it suitable for components in machinery, bearings, bushings, and wear strips.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from debris. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut Nylon component to the intended substrate using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for hard plastics. | Employ carbide-tipped saw blades or routing bits specifically designed for cutting Nylon to prevent chipping and ensure clean edges. |
| Over-tightening fasteners, leading to stress cracks in the Nylon. | Use washers and avoid direct metal-to-Nylon contact where possible. Tighten fasteners incrementally and evenly, allowing for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bearing surfaces, Bushings and sleeves, Conveyor components, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||