This high-quality Nylon stock sheet is engineered for robust industrial applications. Its precise dimensions and superior material properties make it ideal for custom fabrication and replacement parts requiring exceptional strength and wear resistance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.185" |
| Length | 43" |
| Width | 32" |
Designed for demanding industrial environments, this Nylon stock sheet offers a superior balance of strength, toughness, and wear resistance. With a thickness of 0.185 inches, a generous length of 43 inches, and a width of 32 inches, it provides ample material for a wide range of fabrication projects. Nylon's inherent properties, including excellent abrasion resistance, low coefficient of friction, and good chemical resistance, make it suitable for high-stress components, wear pads, bushings, and custom tooling where durability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cutlines on the Nylon stock sheet using a high-contrast marking tool. 2. Secure the stock sheet firmly to a stable cutting surface using appropriate clamps, ensuring minimal vibration during the cutting process. 3. Employ a sharp, carbide-tipped saw blade designed for plastics and a consistent feed rate to achieve clean, precise cuts. Avoid excessive heat buildup by using coolant if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to chipping, melting, or poor cut quality. | Always use a sharp, carbide-tipped blade specifically designed for cutting Nylon and plastics. Ensure the blade's tooth pitch is appropriate for the material thickness. |
| Inadequate clamping of the stock sheet, resulting in vibration and inaccurate cuts. | Securely clamp the Nylon sheet at multiple points to prevent movement and vibration during the cutting operation. Use rubber or plastic inserts on clamps to avoid marring the surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Wear Strips and Bushings, Protective Guards and Covers, Fabricated Fixtures and Jigs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||