This high-performance Nylon Stock Sheet provides exceptional self-lubricating properties and excellent wear resistance. Its robust material composition ensures long service life in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.179" |
| Length | 45" |
| Width | 41" |
A high-performance industrial component, this Nylon Stock Sheet is engineered with a nominal thickness of 0.179 inches, a standard length of 45 inches, and a width of 41 inches. Crafted from a proprietary lubricating grade of nylon, it exhibits low friction coefficients, excellent abrasion resistance, and superior impact strength. These characteristics make it ideal for applications requiring reduced wear and smooth operation, such as bushings, gears, wear pads, and guide rails in machinery and material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Cut the Nylon Stock Sheet to the required dimensions using appropriate tooling. 3. Securely fasten the component using mechanical fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to delamination or chipping. | Utilize sharp, carbide-tipped saw blades designed for plastics to ensure clean cuts. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Apply fasteners with appropriate torque, using washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Custom Machined Parts, Conveyor Components, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||