This robust Nylon Stock Sheet provides exceptional durability and dimensional stability. Ideal for custom fabrication and wear-resistant components in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.172" |
| Length | 38" |
| Width | 30" |
Built to exacting engineering tolerances, this 0.172" thick Nylon Stock Sheet measures 38" in length and 30" in width. Fabricated from high-grade nylon, it exhibits excellent tensile strength, superior abrasion resistance, and good impact toughness. Its low coefficient of friction and self-lubricating properties make it suitable for sliding applications, wear pads, and custom tooling. The material's inherent chemical resistance further enhances its utility in diverse operational settings. This stock ensures consistent performance and longevity in critical manufacturing processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired dimensions on the nylon stock sheet using a suitable marking tool. 2. Employ appropriate cutting tools (e.g., industrial saw with fine-tooth blade, laser cutter) to achieve precise cuts, minimizing stress on the material. 3. Smooth any cut edges with a deburring tool or fine-grit sandpaper to ensure clean finishes and prevent material degradation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during cutting, leading to melting or deformation of the nylon. | Employ cutting methods with adequate cooling or low heat generation, such as a sharp blade with a slow feed rate or a waterjet cutter. |
| Applying too much force during machining, causing chipping or cracking of the nylon. | Utilize sharp cutting tools and appropriate feed rates designed for plastics to prevent material stress and breakage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and bushings, Fabrication of jigs and fixtures, Protective components and guards, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||