This industrial-grade Nylon stock sheet offers exceptional durability and wear resistance. Precisely manufactured to meet stringent specifications, it's engineered for reliable performance in demanding environments and custom fabrication projects.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.171" |
| Length | 19" |
| Width | 27" |
Built to exacting engineering tolerances, this Nylon stock sheet boasts a precise thickness of 0.171 inches, a length of 19 inches, and a width of 27 inches. Manufactured from high-quality Nylon 6/6, it exhibits superior tensile strength, excellent abrasion resistance, and good impact strength, making it suitable for a wide range of mechanical and structural applications. Its chemical resistance to many oils, greases, and solvents further enhances its versatility in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired cut lines on the Nylon stock sheet using appropriate marking tools. 2. Employ a high-speed saw with a fine-tooth blade specifically designed for plastics to achieve clean, precise cuts. 3. Ensure the sheet is securely supported during cutting to prevent vibration and chattering, thereby maintaining dimensional accuracy and surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a saw blade with too few teeth or inappropriate tooth geometry, leading to chipping and poor edge quality. | Utilize a saw blade with a high tooth count and a negative hook angle designed for cutting plastics to ensure a smooth, chip-free cut. |
| Applying excessive feed pressure during cutting, causing the material to overheat, melt, and jam the blade. | Maintain a consistent, moderate feed rate and allow the saw blade to do the cutting. Excessive force will degrade cut quality and tool life. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom machine guards and enclosures, Wear pads and bearings, Chute liners and guides, Tooling and fixture components, Gaskets and seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||