Engineered for superior performance, this Nylon stock sheet provides excellent self-lubricating properties and high wear resistance. Ideal for custom fabrication of components in demanding industrial settings.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.171" |
| Length | 41" |
| Width | 17" |
Designed for demanding industrial environments, this Nylon stock sheet boasts exceptional mechanical strength and inherent lubricity. Measuring 0.171 inches in thickness, 41 inches in length, and 17 inches in width, its dense polymer structure minimizes friction and wear, making it an ideal material for bushings, wear strips, and guide rails. Its excellent abrasion resistance ensures longevity even under heavy load conditions, while its chemical resistance allows for use in diverse operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate tooling. 2. Machine the cut material to achieve precise tolerances for intended application. 3. Securely fasten the fabricated Nylon component using standard industrial fasteners or adhesives, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for polymers, leading to melting or chipping. | Employ sharp, carbide-tipped cutting tools specifically designed for machining plastics and Nylon to achieve clean cuts and prevent material degradation. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the Nylon sheet. | Use torque-limiting tools and appropriate washers when fastening to prevent excessive pressure points and maintain the structural integrity of the Nylon component. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Custom Machine Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||