This high-performance Nylon stock sheet, measuring 0.170" thick, 15" wide, and 20" long, is engineered for durability and precision in challenging industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.170" |
| Length | 15" |
| Width | 20" |
Designed for demanding industrial environments, this 0.170" thick Nylon stock sheet exhibits superior tensile strength, excellent wear resistance, and good impact strength. Its inherent lubricity minimizes friction, making it suitable for components requiring smooth operation and longevity. The sheet's dimensional stability under varying conditions ensures consistent performance in applications such as wear pads, bearings, bushings, and custom-machined parts. The 15" x 20" dimensions provide ample material for a range of fabrication projects.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the Nylon stock sheet. 2. Employ a high-speed saw with a fine-tooth blade designed for plastics to ensure clean cuts. 3. Deburr edges thoroughly to prevent material degradation and ensure proper fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades which can cause melting and chipping. | Utilize blades specifically designed for cutting plastics, often featuring a higher tooth count and negative rake angle. |
| Applying excessive force during cutting, leading to binding and poor cut quality. | Allow the saw to do the work; maintain a steady, controlled feed rate to prevent overheating and material deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Pads, Bearings and Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||