This premium lubricating grade Nylon stock sheet offers exceptional wear resistance and a low coefficient of friction. Its robust properties make it the ideal material for components requiring self-lubrication and prolonged operational life.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.168" |
| Length | 40" |
| Width | 35" |
Trusted by engineers across multiple sectors, this Nylon stock sheet boasts a precise thickness of 0.168 inches, a generous length of 40 inches, and a width of 35 inches. Manufactured from high-grade Nylon, it exhibits excellent tensile strength, impact resistance, and superior self-lubricating properties, minimizing the need for external lubricants. This makes it ideal for applications such as bearings, bushings, wear pads, and sliding components in machinery and industrial equipment where reduced friction and wear are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free of debris. 2. Accurately machine the Nylon stock sheet to the required dimensions using standard machining practices for plastics. 3. Install the machined Nylon component, ensuring proper fit and alignment within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining at excessively high speeds without adequate cooling. | Use sharp tooling and maintain moderate cutting speeds with appropriate coolant to prevent melting or deformation of the Nylon. |
| Over-tightening fasteners, leading to material deformation or cracking. | Employ proper torque specifications and consider the use of washers to distribute load, especially in thin sections. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction bearings and bushings, Wear pads and guide rails, Sealing components in abrasive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||