This robust Nylon Stock Sheet provides exceptional durability and wear resistance for demanding industrial environments. Its excellent machinability and self-lubricating properties make it ideal for custom fabrication and replacement parts.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.165" |
| Length | 22" |
| Width | 14" |
A high-performance industrial component, this Nylon Stock Sheet is manufactured from robust polyamide material, offering superior tensile strength and impact resistance. With precise dimensions of 0.165 inches in thickness, 22 inches in length, and 14 inches in width, it is engineered for applications requiring excellent abrasion resistance and low friction. The material's inherent self-lubricating qualities minimize wear in moving parts, making it suitable for gears, bushings, wear pads, and custom-machined components in various machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the Nylon Stock Sheet. 2. Carefully cut the sheet using appropriate sawing or cutting tools, ensuring straight edges. 3. Deburr all cut edges to remove any sharp protrusions before further processing or installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that cause excessive heat buildup and melting. | Employ sharp, high-speed cutting tools with adequate cooling to prevent melting and ensure clean cuts. |
| Not accounting for thermal expansion/contraction in the design. | When designing components, consider nylon's coefficient of thermal expansion and allow for appropriate clearances in mating parts. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Parts, Wear Strips and Bushings, Gears and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||