This high-performance Nylon Stock Sheet offers exceptional durability, wear resistance, and low friction. Ideal for custom fabrication of components requiring robust mechanical properties in demanding industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.158" |
| Length | 30" |
| Width | 35" |
Specified by design engineers worldwide, this Nylon Stock Sheet provides superior mechanical performance. With a substantial 0.158-inch thickness, 30-inch length, and 35-inch width, it offers ample material for complex machining. Its inherent properties include excellent tensile strength, impact resistance, and a low coefficient of friction, making it suitable for demanding applications such as bearings, wear pads, gears, and custom tooling where durability and reduced wear are critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the substrate surface thoroughly. 2. Cut the Nylon Stock Sheet to the required dimensions using appropriate cutting tools (e.g., bandsaw, CNC router). 3. Secure the fabricated part using fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastic, leading to melting or poor edge quality. | Employ carbide-tipped saw blades or routers specifically designed for machining nylon and other plastics. Maintain appropriate feed rates and cooling to prevent overheating. |
| Over-tightening fasteners, causing stress concentrations and potential cracking in the nylon. | Use washers to distribute the load and tighten fasteners to a recommended torque specification. Allow for thermal expansion if operating in a wide temperature range. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom machined gears and sprockets, Wear strips and guide rails, Bushings and bearings, Protective covers and shields, Dampening components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||