This robust Nylon stock sheet offers exceptional dielectric strength and mechanical integrity, making it ideal for electrical insulation, structural components, and protective shielding in demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.157" |
| Length | 12" |
| Width | 39" |
Built to exacting engineering tolerances, this 0.157-inch thick Nylon stock sheet measures 12 inches in width and 39 inches in length. Nylon's inherent properties, including excellent electrical insulation, high tensile strength, and good abrasion resistance, are critical for its use in the electrical and lighting sectors. This material exhibits a high dielectric strength, effectively preventing electrical current flow, and a low coefficient of friction, facilitating smooth operation in moving parts. Its robust nature allows it to withstand moderate temperatures and mechanical stresses, ensuring reliable performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut sheet using suitable fasteners or adhesives, ensuring proper contact and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool, leading to uneven edges and potential delamination. | Employ sharp, industrial-grade cutting tools specifically designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentrations and cracking in the Nylon. | Use appropriate torque settings and washers when fastening to distribute pressure evenly and prevent material damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation barriers, Housings for lighting components, Mechanical wear components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||