This robust Nylon stock sheet offers exceptional mechanical strength and wear resistance. Precisely manufactured to 0.141" thickness, 20" length, and 19" width, it serves as a reliable raw material for critical component fabrication.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.141" |
| Length | 20" |
| Width | 19" |
Built to exacting engineering tolerances, this Nylon stock sheet boasts a nominal thickness of 0.141 inches, a length of 20 inches, and a width of 19 inches. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and good chemical stability, make it ideal for applications requiring durability under stress and friction. This sheet is engineered for precision machining, ensuring consistent performance in demanding environments, from bearing surfaces and wear pads to structural components and protective shielding. Its dimensional stability minimizes deformation under load and varying environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate to ensure a clean, flat surface. 2. Accurately cut the Nylon sheet to the required dimensions using appropriate tooling. 3. Secure the cut Nylon component using recommended fasteners or adhesives, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to chipping or melting. | Employ sharp, specialized cutting tools designed for plastics, and maintain appropriate cutting speeds and feed rates. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Use appropriate torque specifications for fasteners and consider using washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Bearing surfaces and bushings, Wear pads and guides, Gears and sprockets, Protective shielding and covers, Custom fabricated components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||