This robust Nylon stock sheet offers exceptional dielectric strength and impact resistance. Its precise dimensions and durable material make it a prime choice for electrical insulation, mechanical components, and protective barriers in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.136" |
| Length | 17" |
| Width | 13" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits superior electrical insulation properties and excellent mechanical strength. With a thickness of 0.136 inches, a length of 17 inches, and a width of 13 inches, it is fabricated from high-grade Nylon, ensuring resistance to abrasion, chemicals, and moderate temperatures. Its low coefficient of friction and inherent self-lubricating qualities further enhance its utility in dynamic applications. This material is ideal for fabricating custom electrical insulators, structural components, and wear parts within electrical and lighting systems where reliability and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Deburr all edges to ensure a smooth finish and prevent stress concentrations. 3. Secure the fabricated component using suitable fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ sharp, specialized plastic cutting blades (e.g., carbide-tipped) and maintain adequate feed rates to prevent excessive heat buildup and material damage. |
| Over-tightening fasteners, which can cause stress cracking in the Nylon material. | Use appropriate torque settings and consider incorporating washers to distribute clamping force evenly across the surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation components, Custom housings and enclosures, Wear plates and bushings in lighting fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||