Engineered for superior performance, this lubricating grade Nylon stock sheet provides exceptional wear resistance and a low coefficient of friction. Ideal for dynamic components requiring reduced friction and extended service life.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.129" |
| Length | 38" |
| Width | 34" |
Built to exacting engineering tolerances, this Nylon stock sheet measures 0.129 inches thick, 38 inches in length, and 34 inches in width. Crafted from a specialized lubricating grade Nylon, it exhibits excellent self-lubricating properties, low moisture absorption, and good chemical resistance. Its inherent toughness and abrasion resistance make it suitable for applications demanding high mechanical strength and reduced wear, such as sliding components, bearings, gears, and wear strips in industrial machinery. The precise dimensions ensure seamless integration into existing systems and facilitate predictable performance under load.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut piece using suitable fasteners or adhesives, ensuring proper alignment with the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for Nylon, leading to chipping or melting. | Employ sharp, carbide-tipped blades or specialized routing bits designed for plastics to achieve clean cuts and prevent material damage. |
| Over-tightening fasteners, which can cause stress cracking in the Nylon material. | Use washers and tighten fasteners incrementally, ensuring they are snug but not excessively stressed. Consider using slightly larger holes for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction wear strips, Self-lubricating bearings, Custom gears and sprockets, Chute liners and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||