This 0.127-inch thick Nylon stock sheet offers exceptional dielectric strength and mechanical resilience. Measuring 40" x 30", it is engineered for demanding electrical and lighting applications requiring robust insulation and protection.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.127" |
| Length | 40" |
| Width | 30" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits superior electrical insulation properties and excellent mechanical strength. With a precise thickness of 0.127 inches and dimensions of 40 inches by 30 inches, it provides a reliable material for fabricated components in electrical enclosures, switchgear, and lighting fixtures. Its inherent toughness, resistance to abrasion, and good thermal stability make it a preferred choice for applications where durability and safety are paramount. The material's low moisture absorption further enhances its performance in various environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut sheet using suitable fasteners or adhesives, ensuring proper electrical isolation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool, leading to rough edges and potential delamination. | Employ sharp, specialized cutting tools designed for plastics to achieve clean, precise cuts. |
| Over-tightening fasteners, which can cause stress cracks in the Nylon. | Use appropriate torque settings or consider using washers to distribute pressure evenly when fastening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation barriers, Light fixture housings, Control panel components, Terminal blocks, Switchgear components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||