This industrial-grade Nylon stock sheet provides a robust and dimensionally stable material for a wide range of manufacturing and prototyping applications. Its excellent wear resistance and impact strength make it ideal for demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.116" |
| Length | 38" |
| Width | 25" |
Built to exacting engineering tolerances, this Nylon stock sheet offers superior dimensional stability and flatness. Measuring 0.116 inches thick, 38 inches in length, and 25 inches in width, it is fabricated from high-performance Nylon 6/6, known for its excellent tensile strength, abrasion resistance, and low coefficient of friction. These properties make it suitable for precision tooling, jigs, fixtures, wear pads, and custom-machined components where consistent performance and durability are critical requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove all debris and contaminants. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate machining tools for Nylon. 3. Secure the sheet using mechanical fasteners or an approved adhesive, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or uneven edges. | Employ sharp, specialized cutting tools (e.g., carbide-tipped blades) with appropriate feed rates and cooling to achieve clean cuts. |
| Over-tightening fasteners, causing stress concentrations and potential cracking in the Nylon. | Use washers and tighten fasteners incrementally and evenly to distribute load and avoid excessive stress on the material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Precision Machining Components, Tooling and Fixturing, Wear Strips and Bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||