This premium Nylon stock sheet offers superior strength, abrasion resistance, and chemical inertness. Its robust 0.112" thickness is ideal for demanding fabrication and industrial applications requiring exceptional durability.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.112" |
| Length | 46" |
| Width | 37" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a precise thickness of 0.112 inches, a generous length of 46 inches, and a width of 37 inches. Constructed from high-performance Nylon, it exhibits excellent tensile strength, high impact resistance, and low coefficient of friction, making it suitable for wear components, gaskets, seals, and structural elements in demanding industrial environments. Its inherent lubricity and resistance to common solvents and oils ensure longevity in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the fabrication area thoroughly to remove any debris. 2. Accurately measure and mark the sheet according to design specifications. 3. Utilize appropriate cutting tools (e.g., industrial saw, laser cutter) for precise shaping. 4. Employ suitable joining methods (e.g., adhesive bonding, mechanical fastening) for assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that may cause delamination or uneven edges. | Employ industrial-grade cutting equipment designed for plastics, ensuring sharp blades and proper feed rates. |
| Overheating the material during cutting or machining, leading to melting or deformation. | Maintain appropriate cutting speeds and use cooling mechanisms (e.g., air blast, coolant) to dissipate heat effectively. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Gaskets and Seals, Protective Covers, Housings and Brackets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||