This 0.111" thick Nylon stock sheet offers exceptional durability and wear resistance, ideal for fabricating custom pneumatic components. Its robust material properties ensure long-lasting performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.111" |
| Length | 33" |
| Width | 47" |
Engineered for reliability and performance, this Nylon stock sheet boasts a precise 0.111" thickness, a generous 33" width, and an extensive 47" length, providing ample material for diverse pneumatic system fabrication. Manufactured from high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it suitable for seals, gaskets, wear strips, and custom manifold components within pneumatic machinery. Its inherent toughness and resistance to oils and solvents ensure consistent operation and extended service life in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark the desired component dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., laser cutter, CNC router, or sharp industrial knife) to precisely cut the marked material. 3. Smooth any rough edges using fine-grit sandpaper or a deburring tool to ensure a clean finish and optimal fit within the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to uneven edges or material damage. | Employ sharp, high-quality cutting tools specifically designed for plastic materials and ensure they are properly maintained for clean, precise cuts. |
| Neglecting to account for material expansion or contraction due to temperature fluctuations. | Allow for a small tolerance in critical dimensions to accommodate potential expansion or contraction, especially in environments with significant temperature variations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, Wear pads and guides for pneumatic actuators, Gaskets and seals for pneumatic valve bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||