This robust Nylon stock sheet offers exceptional durability and wear resistance. Its precise dimensions and tough material make it suitable for a wide range of custom fabrication and industrial applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.110" |
| Length | 30" |
| Width | 41" |
Designed for demanding industrial environments, this 0.110-inch thick Nylon stock sheet provides a high-performance material solution. Its inherent properties, including excellent tensile strength, impact resistance, and low coefficient of friction, make it ideal for applications requiring robust wear surfaces and dimensional stability. The generous 30-inch by 41-inch dimensions allow for efficient utilization in custom jig and fixture fabrication, as well as for creating durable wear pads and custom tooling components that withstand heavy loads and continuous operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the nylon stock sheet. 2. Cut to size using appropriate industrial cutting tools (e.g., band saw, CNC router). 3. Smooth edges using a deburring tool or file to remove sharp corners.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ tools with sharp, appropriate tooth geometry for plastics to prevent melting and chipping. |
| Over-tightening fasteners, causing material deformation. | Utilize washers and torque fasteners to a level that secures the part without excessive pressure, allowing for thermal expansion. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Jig and Fixture Construction, Wear Pads and Bushings, Chute Liners and Conveyor Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||