This robust Nylon stock sheet offers exceptional durability and impact resistance. It's specifically engineered for the rigors of pneumatic applications, providing a reliable material for custom fabrication and replacement parts.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.109" |
| Length | 45" |
| Width | 33" |
Designed for demanding industrial environments, this 0.109-inch thick Nylon stock sheet measures 45 inches in length and 33 inches in width. Its inherent toughness, excellent wear resistance, and low coefficient of friction make it an ideal substrate for fabricating pneumatic components such as seals, valve seats, and wear pads. The material's ability to withstand moderate pressures and resist chemical degradation ensures longevity in fluid power systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate tooling. 2. Machine or form the cut material into the desired pneumatic component. 3. Ensure all mating surfaces are clean and free of debris before assembly into the pneumatic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard plastic cutter that may cause chipping or cracking. | Utilize a sharp, high-speed cutting tool designed for plastics to achieve clean cuts. |
| Over-tightening fasteners when securing components made from this sheet, leading to stress fractures. | Apply appropriate torque values during assembly, considering the material's properties to prevent damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components, Valve seals and seats, Wear pads and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||