This high-performance Nylon stock sheet provides a robust and versatile solution for various material handling needs. Its excellent wear resistance and low coefficient of friction ensure efficient operation and longevity in industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.109" |
| Length | 24" |
| Width | 14" |
A high-performance industrial component, this Nylon stock sheet is engineered for demanding material handling applications. Measuring 0.109 inches in thickness, 24 inches in length, and 14 inches in width, it offers a substantial surface area for fabrication. The inherent properties of Nylon, including superior abrasion resistance, impact strength, and chemical inertness, make it ideal for components subjected to continuous wear and tear, such as guides, chutes, and wear strips. Its low friction surface minimizes drag, enhancing the efficiency of moving goods and reducing energy consumption.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for precise cuts. 3. Securely fasten the fabricated Nylon component to its intended mounting surface using suitable hardware and techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect cutting tools, leading to rough edges and potential delamination. | Employ sharp, high-quality saw blades designed for plastics. Ensure proper feed rate and cooling to maintain clean cuts. |
| Over-tightening fasteners, which can cause stress concentrations and eventual cracking of the Nylon. | Use washers to distribute load and tighten fasteners to a snug fit, avoiding excessive torque. Consider using nylon nuts and bolts for a fully non-metallic solution. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Conveyor system guides and wear strips, Chute liners for bulk material handling, Impact plates and protective barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||