This robust Nylon stock sheet is engineered for demanding abrading and polishing tasks. Its precise dimensions and resilient material properties ensure consistent performance and superior surface finishing across various industrial applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.106" |
| Length | 38" |
| Width | 18" |
A high-performance industrial component, this Nylon stock sheet measures 0.106 inches in thickness, 38 inches in length, and 18 inches in width. Fabricated from high-grade nylon, it exhibits excellent abrasion resistance, low coefficient of friction, and good impact strength, making it ideal for abrasive media, polishing pads, and wear surfaces. Its dimensional stability and chemical inertness further contribute to its suitability in diverse manufacturing and finishing processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare the substrate or mounting surface, ensuring it is clean and free of debris. 3. Secure the cut Nylon sheet to the prepared surface using suitable industrial adhesives or mechanical fasteners, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to jagged edges or material degradation. | Employ sharp, high-quality cutting tools specifically designed for plastics, such as a fine-tooth saw or industrial shear. |
| Inadequate surface preparation before bonding or fastening, resulting in poor adhesion or uneven mounting. | Thoroughly clean and degrease both the Nylon sheet and the substrate surface to ensure optimal adhesion and a secure installation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Abrasive backing material, Polishing pad substrate, Wear strips and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||