This industrial-grade Nylon stock sheet offers exceptional toughness and wear resistance. Its precise dimensions make it ideal for custom fabrication and replacement parts in rigorous operational settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.104" |
| Length | 43" |
| Width | 39" |
Designed for demanding industrial environments, this Nylon stock sheet provides a robust material solution for custom component fabrication. With a precise thickness of 0.104 inches, a generous length of 43 inches, and a width of 39 inches, it offers ample material for a wide range of applications. Nylon's inherent properties, including excellent tensile strength, abrasion resistance, and low coefficient of friction, ensure durability and extended service life in high-stress applications. Its machinability allows for intricate designs and tight tolerances when processed using standard sawing and cutting techniques.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark precise cut lines on the Nylon stock sheet. 2. Utilize appropriate sawing equipment with a suitable blade for plastics to achieve clean cuts. 3. Deburr edges to remove any sharp or rough areas post-cutting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a blade designed for wood or metal, leading to melting or chipping of the nylon. | Employ a sharp, high-tooth-count blade specifically designed for cutting plastics or polymers to ensure a clean and efficient cut. |
| Applying excessive force during cutting, causing the material to crack or bind the blade. | Allow the saw to do the work by maintaining a steady feed rate and avoiding pushing the material through the blade forcefully. Ensure proper blade speed for nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Gears and sprockets, Bushings and bearings, Chute liners and impact plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||