This 0.104" thick Nylon stock sheet provides exceptional mechanical strength and wear resistance. Ideal for fabricating custom pneumatic components requiring robust performance and longevity.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.104" |
| Length | 16" |
| Width | 17" |
Specified by design engineers worldwide, this 0.104" thick Nylon stock sheet offers excellent tensile strength, high abrasion resistance, and good impact toughness, making it a superior choice for pneumatic applications. Its dimensions of 16" x 17" allow for versatile fabrication of seals, wear pads, and custom fittings within pneumatic systems. The material's low coefficient of friction reduces wear and energy loss, ensuring reliable operation under pressure and dynamic conditions. Its inherent chemical resistance further extends its service life in various industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to desired dimensions using appropriate cutting tools for Nylon. 2. Machine or form component to exact specifications, ensuring tight tolerances for pneumatic sealing. 3. Install fabricated component into the pneumatic system, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause delamination or excessive heat. | Utilize sharp, carbide-tipped tools specifically designed for machining plastics like Nylon to ensure clean cuts and prevent material degradation. |
| Over-tightening fasteners, leading to stress cracks or deformation of the Nylon component. | Apply torque specifications recommended for Nylon, or use appropriate washers to distribute load and avoid localized pressure points. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder seals, Wear strips and guides, Custom pneumatic fittings and housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||