This high-performance Nylon stock sheet offers exceptional durability and wear resistance. Precisely manufactured to industry standards, it's the ideal raw material for fabricating critical components across various industrial sectors.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.097" |
| Length | 27" |
| Width | 19" |
A proven choice for industrial professionals, this Nylon stock sheet provides superior mechanical strength, excellent abrasion resistance, and good chemical inertness. With precise dimensions of 0.097" thickness, 27" length, and 19" width, it is engineered for optimal performance in demanding environments. Ideal for machining into gears, bearings, wear pads, and structural components where reliability and longevity are paramount. Its inherent lubricity reduces friction, extending the service life of moving parts.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate thoroughly to remove any contaminants. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using standard fastening methods (e.g., screws, adhesives) suitable for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper machining speeds leading to excessive heat generation and material deformation. | Utilize recommended machining speeds for Nylon, employing coolant to manage heat buildup and ensure clean cuts. |
| Using standard fasteners without considering Nylon's thermal expansion properties. | Incorporate oversized holes or slots for fasteners to accommodate Nylon's thermal expansion and contraction, preventing stress concentrations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets, Electrical insulators, Chute liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||