This high-performance Nylon stock sheet is engineered for demanding material handling applications. Its robust composition provides exceptional wear resistance, low friction, and superior impact strength, ensuring longevity and reliability in industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.094" |
| Length | 13" |
| Width | 42" |
Trusted by engineers across multiple sectors, this Nylon stock sheet boasts a precise thickness of 0.094 inches, with dimensions of 13 inches in length and 42 inches in width. Fabricated from premium-grade Nylon (PA6/PA66), it exhibits excellent tensile strength, high abrasion resistance, and a low coefficient of friction, making it ideal for reducing wear and facilitating smooth movement in sliding components, wear strips, and custom-fabricated material handling solutions. Its inherent toughness ensures dependable performance under significant load and impact.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions. 3. Securely fasten the sheet using appropriate mechanical fasteners or adhesive, ensuring a flush and stable installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or uneven wear. | Ensure the mounting surface is meticulously cleaned and free of dust, grease, or moisture before installation. |
| Using incorrect fasteners that could damage the Nylon or compromise structural integrity. | Employ fasteners designed for plastic applications, with appropriate washers to distribute load and prevent over-tightening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Chute Liners, Impact Pads, Conveyor Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||