This premium Nylon stock sheet provides exceptional wear resistance, high tensile strength, and excellent chemical stability. Its robust properties make it a go-to material for diverse industrial fabrication needs.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.079" |
| Length | 21" |
| Width | 35" |
Manufactured under strict quality controls, this Nylon stock sheet measures 0.079 inches in thickness, 21 inches in width, and 35 inches in length. Composed of high-grade Nylon 6/6, it exhibits superior abrasion resistance, a high yield strength of approximately 9,000 psi, and a melting point of around 485°F (252°C). This material is well-suited for applications demanding impact resistance and low friction, such as wear strips, bearing components, and custom-machined parts in the automotive and manufacturing sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is clean and free from contaminants. 2. Machine or cut to the required dimensions using appropriate tooling for Nylon. 3. Securely fasten the fabricated component using suitable mechanical fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, high-speed steel or carbide tooling specifically designed for machining Nylon. Ensure adequate cooling during cutting operations. |
| Over-tightening fasteners, which can cause stress cracking in the Nylon. | Employ a torque wrench to avoid excessive pressure on fasteners. Consider using washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bearing and Bushing Components, Gears and Sprockets, Custom Machined Parts, Protective Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||