This industrial-grade Nylon stock sheet offers exceptional strength and wear resistance. Precisely manufactured to 0.077" thickness, it provides a versatile raw material for a wide range of manufacturing and repair projects.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.077" |
| Length | 42" |
| Width | 22" |
Specified by design engineers worldwide, this Nylon stock sheet is manufactured to meet stringent performance requirements. With a nominal thickness of 0.077 inches (1.956 mm), a generous length of 42 inches (1066.8 mm), and a width of 22 inches (558.8 mm), it offers ample material for fabrication. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, low coefficient of friction, and good chemical resistance, make it ideal for applications such as wear pads, bushings, gears, and protective coverings in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and free of debris. 2. Carefully measure and mark the desired dimensions for cutting. 3. Utilize appropriate cutting tools for nylon, such as a band saw or router, with adequate cooling if necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to melting or chipping. | Employ sharp blades specifically designed for plastic or nylon, and consider a slow feed rate with cooling. |
| Failing to account for thermal expansion during machining. | Allow for slight clearances in designs where temperature fluctuations are significant. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Custom Bushings and Bearings, Protective Covers and Shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||