This robust Nylon stock sheet offers exceptional wear resistance, impact strength, and self-lubricating properties, making it a superior choice for demanding material handling components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.075" |
| Length | 22" |
| Width | 37" |
Engineered for reliability and performance, this 0.075-inch thick Nylon stock sheet provides a versatile solution for custom fabrication in material handling systems. Its excellent tensile strength and abrasion resistance, characteristic of Nylon 6, ensure longevity under continuous operational stress. The 22-inch by 37-inch dimensions offer ample surface area for cutting and shaping into various components such as wear strips, slide guides, and impact pads, minimizing friction and preventing wear on mating surfaces. Its inherent toughness and resistance to oils and chemicals further enhance its suitability for challenging industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to the required dimensions using appropriate cutting tools for Nylon. 2. Prepare mounting surfaces for secure attachment. 3. Fasten the fabricated Nylon component using recommended hardware for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause delamination or melting. | Employ sharp, carbide-tipped blades designed for plastics to ensure clean cuts. |
| Over-tightening fasteners, potentially cracking the Nylon. | Use washers and tighten fasteners to a snug, not excessive, torque to accommodate Nylon's slight expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Slide bearings and bushings, Impact plates and bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||