This high-performance Nylon stock sheet provides exceptional durability and wear resistance. Its robust material properties make it ideal for various material handling applications where strength and longevity are critical.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.071" |
| Length | 27" |
| Width | 26" |
Built to exacting engineering tolerances, this Nylon stock sheet measures 0.071 inches in thickness, 27 inches in length, and 26 inches in width. Manufactured from high-grade Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and good impact toughness, making it suitable for dynamic load-bearing applications. Its low coefficient of friction also facilitates smooth material movement. This sheet is engineered for demanding operational environments within the material handling sector, ensuring reliable performance and extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for plastics. 3. Secure the sheet firmly to the intended surface using suitable fasteners, ensuring even distribution of pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools which can lead to uneven edges and potential delamination. | Utilize sharp, carbide-tipped blades specifically designed for cutting Nylon or plastics to ensure clean, precise cuts. |
| Over-tightening fasteners, which can cause localized stress points and potential cracking of the Nylon sheet. | Hand-tighten fasteners initially, then apply a final turn with a wrench or driver, ensuring they are snug but not excessively tight. Consider using washers to distribute pressure. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides in conveyor systems, Protective liners for chutes and hoppers, Impact pads and bumpers in material handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||