This robust Nylon stock sheet offers exceptional strength and wear resistance for demanding fabrication tasks. Measuring 0.067" thick, 18" wide, and 43" long, it's a reliable material for diverse industrial needs.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.067" |
| Length | 43" |
| Width | 18" |
A proven choice for industrial professionals, this Nylon stock sheet delivers superior mechanical performance. With a precise thickness of 0.067 inches, it provides excellent abrasion resistance, high tensile strength, and good impact toughness. Its dimensions of 18 inches in width and 43 inches in length make it suitable for a wide range of custom fabrication projects, including wear pads, bushings, and protective components where durability and low friction are critical. The material's inherent chemical resistance further enhances its utility in harsh environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Accurately measure and mark the desired dimensions using appropriate marking tools. 3. Carefully cut the Nylon stock sheet using a high-speed saw or industrial router with a suitable bit for plastics.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to rough edges and potential material stress. | Employ sharp, specifically designed cutting tools for plastics to ensure clean cuts and maintain material integrity. |
| Overheating the material during cutting or machining, causing melting or deformation. | Utilize appropriate cooling methods, such as air jets or coolant, and maintain optimal cutting speeds to prevent excessive heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Custom gaskets and seals, Protective liners and bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||