This robust Nylon Stock Sheet offers exceptional durability and impact resistance. Its non-marring properties make it ideal for fabricating custom jigs, fixtures, and protective components in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.065" |
| Length | 28" |
| Width | 27" |
Manufactured under strict quality controls, this Nylon Stock Sheet boasts a precise thickness of 0.065 inches, a length of 28 inches, and a width of 27 inches. Constructed from high-density nylon, it exhibits superior abrasion resistance, chemical inertness, and excellent dielectric properties. The material's inherent lubricity minimizes friction, making it suitable for sliding components and wear surfaces. Its dimensional stability ensures consistent performance across a wide temperature range, fulfilling stringent industrial requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the nylon stock sheet using a suitable marking tool. 2. Cut the sheet to size using appropriate cutting tools such as a band saw, jigsaw, or CNC router. 3. Smooth cut edges with a deburring tool or fine-grit sandpaper to remove any sharp points.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to material chipping or uneven edges. | Employ sharp, high-quality cutting blades specifically designed for plastics. Ensure proper feed rates and cooling to prevent melting. |
| Overheating the nylon during cutting or machining, causing deformation. | Utilize appropriate cooling methods, such as air jets or coolant, and maintain optimal cutting speeds to dissipate heat effectively. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Jig and Fixture Fabrication, Protective Wear Strips and Bushings, Electrical Insulation Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||