This high-quality lubricating grade Nylon stock sheet offers superior low-friction characteristics and excellent wear resistance. Precisely manufactured for demanding industrial applications requiring durable, self-lubricating components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.061" |
| Length | 37" |
| Width | 47" |
Built to exacting engineering tolerances, this 0.061-inch thick Nylon stock sheet measures 37 inches in length and 47 inches in width. Composed of a specialized lubricating grade nylon formulation, it exhibits a low coefficient of friction, excellent abrasion resistance, and good impact strength. This material is ideal for fabricating components that require minimal lubrication, operate under moderate loads, and experience significant sliding or wear. Its inherent lubricity reduces energy consumption and extends service life in dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools for polymers. 2. Smooth all cut edges to prevent stress concentration and ensure a clean finish. 3. Mechanically fasten or bond the fabricated Nylon component into its intended application, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Utilize specialized carbide-tipped blades for plastic cutting to achieve clean, precise cuts without material degradation. |
| Over-tightening fasteners, causing localized stress and potential cracking of the Nylon. | Employ washers to distribute load and tighten fasteners to a torque specification that prevents deformation or damage to the Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guide rails, Bushings and bearings, Gears and sprockets, Chute liners, Conveyor components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||