This robust nylon stock sheet offers exceptional wear resistance and impact strength, ideal for critical safety components. Its precise dimensions ensure seamless integration into manufacturing processes.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.061" |
| Length | 15" |
| Width | 19" |
Specified by design engineers worldwide, this 0.061-inch thick nylon stock sheet measures 15 inches in width and 19 inches in length. Manufactured from high-performance nylon, it exhibits superior tensile strength, abrasion resistance, and excellent electrical insulation properties. Its inherent toughness makes it suitable for protective barriers, wear pads, and structural components in demanding industrial environments where durability and safety are paramount. The material's resilience withstands significant mechanical stress and repeated impact.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate surface thoroughly to remove all contaminants. 2. Precisely cut the nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut sheet to the intended application using recommended mechanical fasteners or adhesives, ensuring a snug fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or fit. | Ensure the mounting surface is clean, dry, and free from any grease, oil, or debris before installation. |
| Using incorrect cutting tools resulting in frayed edges or imprecise dimensions. | Employ sharp, high-quality cutting tools designed for plastics, such as a fine-tooth saw or a specialized router bit, for clean cuts. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Protective guards and shielding, Wear strips and guide rails, Electrical insulation components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||