This premium Nylon stock sheet is engineered for superior performance in high-wear, low-friction environments. Its inherent lubricity and excellent durability make it ideal for demanding industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.055" |
| Length | 19" |
| Width | 18" |
Manufactured under strict quality controls, this lubricating grade Nylon stock sheet offers exceptional wear resistance, low coefficient of friction, and good mechanical strength. With a precise thickness of 0.055 inches, a length of 19 inches, and a width of 18 inches, it is ideally suited for custom fabrication of wear pads, bushings, guides, and other components requiring self-lubricating properties and protection against abrasion in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Prepare the mating surface for optimal adhesion or mechanical fastening. 3. Securely fasten or install the fabricated Nylon component, ensuring proper alignment and clearance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive heat during machining, which can lead to material degradation and reduced performance. | Employ sharp cutting tools and appropriate cooling methods to manage heat during fabrication. |
| Inadequate surface preparation before installation, compromising the longevity of the component. | Ensure mating surfaces are clean, smooth, and free from contaminants before mounting. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Wear Pads and Strips, Self-Lubricating Bushings and Bearings, Guide Rails and Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||