This high-performance Nylon stock sheet is engineered for superior lubrication and wear resistance. Its precise dimensions and material properties make it ideal for a wide range of demanding industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.051" |
| Length | 32" |
| Width | 21" |
Built to exacting engineering tolerances, this Nylon stock sheet offers a nominal thickness of 0.051 inches, a length of 32 inches, and a width of 21 inches. Composed of a specialized lubricating grade of Nylon, it exhibits excellent self-lubricating properties, a low coefficient of friction, and superior abrasion resistance. This material is designed to minimize wear and extend the service life of mating components in dynamic systems, reducing the need for external lubricants in many instances. Its dimensional stability under varying loads and temperatures ensures consistent performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove debris and contaminants. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut component to the substrate, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard Nylon instead of lubricating grade for friction-sensitive applications. | Always select lubricating grade Nylon for components requiring reduced friction and self-lubrication. |
| Improperly cleaning mating surfaces before installation. | Ensure all surfaces are meticulously cleaned to prevent premature wear and ensure optimal performance. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Slide plates and rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||