This industrial-grade Nylon Stock Sheet provides exceptional durability and wear resistance. Its robust material properties make it suitable for a wide range of precision cutting and fabrication tasks in demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.050" |
| Length | 26" |
| Width | 12" |
Designed for demanding industrial environments, this 0.050" thick Nylon Stock Sheet offers superior tensile strength, excellent abrasion resistance, and good impact strength. Its machinability allows for precise fabrication of custom components. The 12" x 26" dimensions provide ample material for creating wear pads, bushings, guides, and other critical parts where high performance and longevity are essential. This material is well-suited for applications involving moderate loads and repetitive motion.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired cut lines on the Nylon Stock Sheet using a suitable marking tool. 2. Securely clamp the sheet to a stable cutting surface to prevent movement during operation. 3. Utilize a sharp, appropriate saw blade (e.g., fine-tooth, carbide-tipped) for clean and precise cuts, maintaining a steady feed rate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to chipping or melting. | Employ a sharp, high-quality saw blade specifically designed for cutting plastics or nylon. Ensure proper tooth pitch and set for optimal results. |
| Inadequate clamping, causing the material to shift during cutting. | Use robust clamps to firmly secure the entire sheet to the cutting surface, ensuring stability throughout the sawing process. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Wear Pads, Bushings and Bearings, Machine Guides and Rollers, Protective Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||