This industrial-grade Nylon Stock Sheet is engineered for demanding applications. Its robust material composition and precise dimensions ensure reliable performance in fabrication and protective uses.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.040" |
| Length | 13" |
| Width | 13" |
Built to exacting engineering tolerances, this 0.040-inch thick Nylon Stock Sheet measures 13 inches by 13 inches. Fabricated from high-performance nylon, it exhibits superior impact strength, excellent abrasion resistance, and good chemical inertness, making it ideal for machining custom components, protective barriers, wear pads, and electrical insulation. Its non-conductive properties further enhance its utility in various industrial settings where safety and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to ensure proper adhesion or fastening. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools for polymers. 3. Secure the sheet using mechanical fasteners (screws, rivets) or a suitable adhesive, ensuring a stable and flush fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard metal cutting tools without proper cooling, leading to melting or poor cut quality. | Employ sharp, specialized polymer cutting tools with adequate coolant or appropriate feed rates to prevent heat buildup and ensure clean cuts. |
| Over-tightening fasteners, which can cause stress concentration and cracking in the nylon sheet. | Use washers to distribute pressure and tighten fasteners incrementally to a snug fit, avoiding excessive torque that could deform or damage the material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom component fabrication, Protective wear pads and liners, Electrical insulation and shielding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||