This durable Nylon Stock Sheet is engineered for superior performance in abrading and polishing applications. Its robust material and precise dimensions ensure consistent results and extended service life in demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.031" |
| Length | 34" |
| Width | 16" |
Precision-manufactured to tight tolerances, this 0.031-inch thick Nylon Stock Sheet measures 34 inches in length and 16 inches in width. Composed of high-grade nylon, it exhibits excellent abrasion resistance, low coefficient of friction, and good impact strength. These properties make it ideal for applications requiring controlled material removal, surface finishing, and protection against wear. The sheet's inherent flexibility allows for conformity to various shapes while maintaining structural integrity during operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the desired dimensions using a suitable cutting tool. 2. Secure the cut piece to the abrading or polishing equipment, ensuring a firm and flat attachment. 3. Operate the equipment within specified parameters, monitoring for optimal material removal and surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to uneven edges and material distortion. | Employ sharp, high-quality cutting tools specifically designed for plastics or nylon to ensure clean, precise cuts. |
| Overheating the nylon during cutting or application, causing melting or degradation. | Maintain appropriate cutting speeds and feed rates, and use cooling methods if necessary to prevent excessive heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Surface preparation and finishing of metals, Deburring and edge radiusing of components, Creating matte or satin finishes on various materials.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||