This 0.019" thick Nylon Stock Sheet offers superior wear resistance and impact strength for demanding material handling environments. Its robust properties ensure longevity and reliable performance in critical applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.019" |
| Length | 30" |
| Width | 27" |
Built to exacting engineering tolerances, this 0.019-inch thick Nylon Stock Sheet provides exceptional dimensional stability and consistent performance. Manufactured from high-grade nylon, it exhibits excellent abrasion resistance, low coefficient of friction, and good impact strength, making it ideal for applications such as chute liners, wear strips, and protective pads. The sheet measures 30 inches in length and 27 inches in width, offering ample material for customization and fabrication into various components within material handling systems, ensuring reduced wear and improved operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate surface thoroughly to remove any dirt, debris, or grease. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools designed for plastics. 3. Secure the nylon sheet to the substrate using suitable fasteners or adhesives, ensuring a flush and tight fit to prevent material ingress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that can damage the nylon. | Employ fasteners with broad heads or washers to distribute load and prevent puncturing or cracking the nylon. |
| Applying excessive heat during cutting, leading to material deformation or melting. | Use sharp cutting tools and maintain adequate lubrication or cooling to prevent overheating the nylon during fabrication. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Chute and hopper liners, Wear strips and guides, Impact protection pads, Conveyor system components, Machine guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||