This Schedule 160 seamless Nylon pipe offers exceptional burst strength and chemical resistance. Its precise dimensions ensure leak-free connections and reliable fluid conveyance in critical industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 0.9" |
| Outside Diameter | 2.284" |
| Wall Thickness | 0.449" |
Engineered for reliability and performance, this seamless Nylon pipe boasts a nominal pipe size of 0.9 inches, an precise outside diameter of 2.284 inches, and a substantial wall thickness of 0.449 inches, conforming to Schedule 160 specifications. The inherent chemical inertness and abrasion resistance of Nylon make it suitable for a wide range of aggressive media and high-wear applications, including high-pressure hydraulic systems, chemical processing lines, and abrasive slurry transport, ensuring extended service life and minimal maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate sealant or tape to threaded connections if applicable. 3. Securely tighten fittings, avoiding over-tightening which can compromise the pipe's integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings that do not meet the pipe's pressure or chemical resistance requirements. | Always select fittings specifically rated for the operating pressure and chemical environment that the Nylon pipe will be subjected to. |
| Exposing the Nylon pipe to temperatures exceeding its rated operating range. | Consult the material datasheet for the maximum continuous and intermittent operating temperatures of Nylon and ensure the application stays within these limits. |
A: This Seamless Pipe, Schedule 160 is manufactured from Nylon.
A: High-pressure hydraulic lines, Chemical transfer and processing, Abrasive slurry and powder conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||