This Nylon Schedule 80 seamless pipe offers exceptional durability and chemical resistance for demanding industrial applications. Its precise dimensions ensure reliable performance in critical fluid handling systems.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 4.8" |
| Outside Diameter | 1.630" |
| Wall Thickness | 0.404" |
Specified by design engineers worldwide, this Schedule 80 seamless Nylon pipe boasts a precise 1.630" outside diameter and a substantial 0.404" wall thickness, yielding an internal diameter of 0.822". Engineered from high-performance Nylon, it exhibits excellent tensile strength, abrasion resistance, and compatibility with a broad range of chemicals, making it ideal for high-pressure hydraulic lines, chemical processing, and pneumatic systems where integrity and longevity are paramount. Its seamless construction eliminates potential leak paths and ensures uniform wall thickness for predictable performance under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the pipe ends and the fitting socket thoroughly to remove any debris or contaminants. 2. Apply appropriate solvent cement to both the pipe end and the inside of the fitting socket, ensuring even coverage. 3. Insert the pipe into the fitting socket with a slight twisting motion until it bottoms out, holding firmly for 30-60 seconds to allow initial bonding. 4. Wipe away any excess cement immediately with a clean cloth and allow the joint to cure for the manufacturer-recommended time before pressurizing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong type or insufficient amount of solvent cement. | Always use solvent cement specifically formulated for Nylon pipe and fittings. Apply a liberal, even coat to both surfaces being joined for proper fusion. |
| Insufficient hold time after joining. | Maintain firm pressure on the joint for the recommended 30-60 seconds to ensure the solvent cement creates a strong initial bond before the curing process begins. |
| Exceeding the recommended curing time before system pressurization. | Adhere strictly to the solvent cement manufacturer's curing time guidelines. Premature pressurization can lead to joint failure. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: High-pressure hydraulic fluid transfer lines, Chemical processing and transfer systems, Pneumatic conveying and control systems, Industrial lubrication lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||