High-performance Nylon Schedule 80 seamless pipe engineered for robust fluid handling. Offers excellent chemical resistance and impact strength for critical industrial applications requiring reliability and longevity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 4.3" |
| Outside Diameter | 6.456" |
| Wall Thickness | 0.264" |
Designed for demanding industrial environments, this Nylon Schedule 80 seamless pipe features a 4.3-inch nominal inside diameter (ID), a precise 6.456-inch outside diameter (OD), and a substantial 0.264-inch wall thickness. Constructed from high-grade Nylon, it exhibits superior abrasion resistance, excellent chemical inertness against many solvents and hydrocarbons, and a high tensile strength suitable for moderate pressure applications. Its seamless construction ensures leak-free operation and consistent wall uniformity, making it ideal for hydraulic systems, pneumatic lines, and chemical processing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of debris. 2. Apply appropriate solvent cement specifically designed for Nylon. 3. Join pipe and fitting with a firm, twisting motion, holding for 30 seconds to allow initial set.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect solvent cement for Nylon. | Always use a solvent cement specifically formulated for Nylon to ensure proper fusion and bond strength. |
| Over-tightening fittings, leading to stress cracking. | Hand-tighten fittings and then provide only a slight additional turn with a wrench, avoiding excessive force. |
A: This Seamless Pipe, Schedule 80 is manufactured from Nylon.
A: Hydraulic fluid transfer lines, Pneumatic systems, Chemical conveyance, Low-pressure fuel lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||